Control PCB Diagrams and Installation Method

If we found AC Control PCB damage and the damage can not find the problem do not get confused and troublesome bother replace it with a universal air conditioner control PCB that already exist because if we replace the original PCB manufacturer innate AC was very expensive at all when compared to the price of this universal PCB , and how the installation is very easy PCB, stay plug and play.
How to install an indoor air conditioner control PCB:
• Remove the indoor PCB is damaged and unplug the socket socket
• Attach the adapter and the socket on the PCB input AC 220 volt transformer (1)
• input socket on the PCB AC adapter 12 volts (2)
• Plug the 220 ​​volt power socket on a universal PCB (positive current) that will go into the relay (3)
• 220 Volt input power cable (negative flow) on the PCB power common (5) as shown in the diagram are striped red
• Connect the cable 2 pieces (4 and 6) to the indoor terminal (L and N) which will be forwarded to the outdoor air conditioning compressor to run the blue line (6)
• PCBs are striped pieces broke broke, and paste in each place there are lights running timer, on / off, receiver / remote sensor etc (7)
• Install the indoor fan motor socket (8)
• proceed with the capacitor to the fan plug socket (9)
• Plug socket swing motors (10)
• Running Test without outdoor
• Make sure the remote functions such as ac works well; thermic, swing motors, fan motor speed
• Use seat belts and do not forget to wear a helmet SNIPada several brands ac socket placement of the indoor fan motor wiring is different is not necessarily high, mid and low are starting from the left (as in the diagram above), so before we take off the indoor fan motor sockets in see (marked) wires used to position the low, mid, and high on the PCB old / damaged, if not the same as we stay the course in accordance with this PCB. as well as the fan capacitor, because if it is wrong in penempatanya the fan motor will not work. as well as his swing motors + (plus) its on the left or on the right .. ?? stay behind just plug socket when swingnya no way.