When to replace the compressor oil ... ?? When you have never experienced a freon leak in the air conditioning unit usually happens compressor oil will be carried on the flow of Freon and leak out through the hole in the pipe. Indirectly compressor oil will be reduced and this will cause the compressor to heat up quickly. Or at the time of removal of the AC does not make the process of assembling the air conditioner properly, because it never occurred to the owner of AC by AC unloading itself but forgot to close the tap ac * treway * so that oil and freon will be wasted all. compressor oil change once in overhauling the pipe between the condenser and the indoor and outdoor with the way in FLUSHING. Here's how to change their way or the compressor oil compressor oil fill on the AC, the same walnya step by replacing compressor
1 Remove the pipe high press and low press on the compressor by means of welding
2 Remove the screws that hold the foot compressor
3 Remove the old compressor oil until the oil runs out
4 Place the plastic on the high pipe channel compressor * press *
5. Pour oil into a plastic compressor is the correct amount of oil is needed
6 Put the oil into the compressor slowly
7 After changing the oil in the compressor already done Flushing on the outdoor condenser
8 Replace the compressor by welding on pipes connected to the outdoor condenser As with any vehicle that just change the oil then the engine will sound smoother, and better results on the AC will feel colder than before.
No comments:
Post a Comment