Tuesday, August 26, 2014

Introducing the AC Split

In our paper this time, we will share some of the components are mounted on the ac Split, which is divided into three parts, namely Part Indoor unit, Outdoor unit and Piping Sections:

1 INDOOR COMPONENTS 
Indoor components consist of: 
a. Grille



Grille is the most important part in an indoor, because the grille is the body of inddor sebuag, which serves as a means of status of a series of components that exist in the indoor. 
b. evaporator

Water Conditioner is a device made ​​of copper that is covered with a circle of aluminum flake shaped thin grating and a meeting that serves debagai means to cool the room air change due to circulation assisted by the indoor blower. 
c. Indoor Fan Motor

Motor is an AC / DC that serves the indoor blower moves to get a certain speed in order to circulate the room air through the evaporator. 
d. Indoor blower

Adalah perangkat yang berbentuk bulat sehingga disebut blower yang berfungsi sebagai alat untuk menghempaskan udara ruangan yang dibantu oleh motor fan indoor.
e. PCB / Modul

Micro-computer is a tool that serves to provide the entire range of air conditioner command 
f. remote Controller

Is a tool for mangaplikasikan our desire to ac, which bersingkronisasi with AC Module 
f. thermistor

Is a tool that serves as an air sensor to analyze freezing cold room and analyzed the supply of outdoor. 
g. capacitor fan

Is a tool to help start the indoor fan motor, to new models is usually ac coupled on module / PCB 
f. Air Filters

Is a tool that serves as a filter impurities which are all subjects for the circulation of the indoor, so it helps the cleanliness of the room.

B. COMPONENTS OUTDOOR
Components that are in the outdoor adalag as follows: 
a. body

Is zinc or plastic that serves as a tool for the completion of the entire series of outdoor 
b. Kompressor

Vital is the most tools in a series of air conditioner compressor which is a tool that serves as a means to circulate the freon gas from indoor to outdoor and vice versa there is a process in which the circulation of liquid freon gas into gas and vice versa so get enough condensation and that is called the cooling.
c. condenser

is a tool that has a very similar structure to the evaporator but serves to heat the refrigerant gas to a certain temperature as a means of cooling process is assisted by a certain speed outdoor fan motor and outdoor fan leaves. 
d. capacitor Compressor

Function similarly to the capacitor in an indoor, but have a higher tolerance than the fan capacitor indoor or outdoor fan adapted to the capacity of the compressor and how much force to use a compressor that flows 1 phase / single phase. 
e. Outdoor Fan Motor

Is an electric motor AC / DC that serves as a means to circulate air around the outdoor which serves to maintain a certain temperature so that the stable performance of the compressor. 
f. Outdoor fan capacitor

Serves as a starting Outdoor Fan Motor 
g. capillary

tool that serves to process the gas into a liquid so that condensation occurs. 
h. filter Dryer

As the name implies he serves as fiterr / filter impurities that may be present in the system. 
i. faucet valve

As a means to hold Refrigerant Gas in the ac compressor installed and functioning before as well as a means for vacuumdown. 
j. overload

Is an automated tool that works as a control compressor when the compressor is too hot and when the electricity consumption has gone up and is not in accordance with the capacity of the compressor

2 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. The refrigerant role in air conditioner is nicely defined. Thanks for the amazing article.
    Heating and Cooling Richmond Hill

    ReplyDelete