Discharging or evacuating, often also called the vacuum or dehydrating is emptied or emptied mechanical refrigeration system on refrigeration units, for example: Frezer, Window AC, Split AC, Split duct, celling AC, Cassette AC, AC Central, Floor standing, and Cold storage of air, water vapor and other particles that do not want in the system. Within this system only contains refrigerant must not be mixed with air or other.
When in the air circulation system has been mixed with the air in the system will cause an increase in pressure. Will make the system clogged dirt and moisture will cause corrosion and peeling on the compressor motor windings and cause the motor to burn.
The air can not condense in the system at the pressure and temperature and pressure of the refrigerant condensation same. Therefore, the air would increase the temperature and pressure in the discharge channel. With such high pressure will affect conditions on the low side, because of the high pressure on the high side will be carried on the low side and causes the temperature on the low side of the high menjadfi. In these circumstances the temperature around the low temperature will also be higher in other words the room temperature will be high. example: If we measure the manifold (AC measuring instrument) has needles pointing at a 65 psi but still high room temperature, can be sure the refrigerant is mixed with the air conditioner does not cool the air as a result.
The air will also cause the compounds with lubricating oil in the compressor, these compounds will cause interference on the compressor.
At each replacement of mechanical components Frezer Refrigerator, Window AC, Split AC, Split duct, celling AC, Cassette AC, AC Central, Floor standing must be done vacuum (vacuum), discharge or vacuum is best to use "Deep Vacuum" is by using a vacuum pump to the vacuum level in the system will achieve 30 "Hg vacuum at the vacuum level as this whole particles or substances in the discharged waste mechanic 99.9%. But do not worry if do not have a vacuum machine could still be done manually or with a vacuum Vacuum Body and remember only used for split AC 0.5 to 1.5 hp above the threshold to use a vacuum pump in the event of damage is not our responsibility.
No comments:
Post a Comment