If found, the air conditioner is damaged, our first step in handling it is to distinguish whether the cause of this damage on the electrical system or mechanical system.
To distinguish between the two systems, the first step that must be done is to remove konnector contained in the ac compressor and we do running it manually on the compressor.
In an electric compressor there are 3 terminals of the respective terminals associated with the compressor windings.
Thermofuse mounted on the coil when the compressor which serves hot then the fuse will break up. Thermofuse is shaped like a bimetallic so that when cold it will connect again.
There are 2 loops are represented by 3 pieces terminals. Respective names of the terminals of the coil is:
1.C = Common
2.R = Running
3.S = Starting
To determine the third terminal by means of measuring the resistance between terminals. Where is the easiest way is as follows:
FRONT OF OBSTACLES THAT IS MOST OF TERMINAL "C"
HAMABTAN FRONT OF THE MOST SMALL IS TERMINAL "S"
If the terminal "C" and terminal "S" is found then the rest of the terminal 1 is a terminal "R"
These points of preventive maintenance are very helpful. Every home owner must list them to safe theirs loss in the future. Heating and Cooling Newmarket
ReplyDelete